Benefits of using USB Emulator instead of Standard Floppy Drive

by

Henryseo

From last so many years the floppy disks were being the method of moving files and important data from one computing device to other computing devices. Floppies and the floppy disk drives have been in use in critical industrial applications machines from last so any decades. The range of machines can be from diamond cutting to health analysis purposes. These machines are so expensive that a user can hardly think of changing these. Only the new comers ask for machines those are capable of using USB media on network technology to transfer the data instead of using the old technology. But the major question in today s world is that is there a way out for the users of OLD expensive machines? The answer is simple, yes. Thanks to the new interface technology invented by few technology manufacturers.

With this new floppy to usb emulator, these users can easily

convert floppy to usb

. This floppy to usb converter is designed in such a way that it can fit into practically any machines currently using a floppy disk drive. And the best part of these floppy to usb converters is that there are zero changes or modifications required to be done at the software or circuit level of the machine convert floppy to usb. You can simply convert floppy to usb by swapping the old floppy disk drive with this newly invented floppy to usb emulator. It s a child play sort of thing and no technical knowledge is required convert floppy to usb. Just disconnect your old floppy drive and plug in newly invented floppy to usb converter and the job is done. You can now feel that you have successfully completed the installation job of upgrading your machine to use the floppy to usb converter. Your industrial equipment is ready and upgraded to work for several more years, and you will never go through horrible dreams about floppies any more.

How Floppy to usb converter works?

The floppy to usb converter reads the data from USB flash disc and emulates the read data as a floppy disc, thereby successfully moving the required data to the machine in the similar manner of floppy disk drive did it. In simple words, the machine or equipment never comes to know that the data was transferred from USB flash drive.

You can very easily convert floppy to usb on jacquard controllers like Staubli JC4 , JC5 and Bonas ( 200, 250, 300, 500 series ) , embroidery systems like Melco, SWF, Tajima, Happy, Brother and many more type using inbuilt floppy drives to transfer data using USB discs drives.

These floppy to usb emulator are made keeping in mind that they carry similar size in dimensions as that of a floppy disk drive, and also the type of power jacks are same. All the customer has to do is just to swap the floppy drive with the new can easily

floppy to usb converter

so as to convert floppy to usb.

Many Melco, Tajima, Staubli, Bonas are sold without a floppy drives. If we observe most of these industrial application systems are equipped with floppy drives interface on the main system panel board. These machines can also be very simply upgraded to use floppy to usb converter to read USB flash disc. But, many of such systems do not have an inbuilt FDD, so you may have to buy a 34 pin floppy cable so as to convert floppy to usb on these machines.

Writer is an expert on

convert floppy to usb

. If you want to discuss more on USB emulator or

floppy to usb emulator

or floppy to usb, Visit this site Floppytousb.net

Article Source:

ArticleRich.com